Sonicwall Configuration Guide
Posted by Bob Russo on 29 May 2015 12:41 PM

Sonicwall Configuration Guide

        In working with several resellers on configurations for the popular Sonicwall product, we have put together guides to assist in setup. The documents attached are for configuring with SIP trunks andr for Hosted (Cloud) PBX application.

        The model used in our example is the TZ215 with SonicOS enhanced firmware v. You may not be dealing with this exact product however the TZ line adheres pretty close to the parameters and schema that we present so using this as a rough guide to other models should be possible. While our screen shots or step through direction might not apply, the ESI port and IP address information would be the same.

     We are also providing a link to Dell’s support page for their Security products which provides additional information and available documentation.

    As products mature and change in the market place, some of this information may become outdated, please use the comment forum to update us on any changes that you may find are needed for various situations.

Thank You, ESI Cloud Services

 sonicwall sip trunk best practice.docx (1.26 MB)
 sonicwall hosted pbx practice.docx (526.99 KB)
(3 votes)
This article was helpful
This article was not helpful

Comments (0)
Help Desk Software by Kayako