Knowledgebase
IP900 SIP Account Programming for ESI SIP Trunks
Posted by on 07 September 2016 09:13 AM

The purpose of this configuration guide is to describe the steps needed to configure the ESI IP Server 900 PBX for proper operation with ESI SIP Trunks. Please note that this guide documents the basic configuration needed in the ESI-900 PBX and the requirements of specific SIP Trunking environments may require modifications to the configuration steps provided in this document.

 

Please reference the attached document or the link below. 

Tech Update 346

(0 votes)
This article was helpful
This article was not helpful

Comments (0)
Help Desk Software by Kayako support.esi-estech.com/index.php?