|
Grandstream GXV3140 - provisioning instructions
Posted by on 23 July 2014 07:53 AM
|
|
|
From the main screen, click the F1 button for the Menu:
On the menu, select Settings:
On the Settings screen, select Maintenance:
On the Maintenance screen, go down to the Factory Reset option. Make sure it's set to Full Reset, then select the Reset button:
The following warning window will come up. Click on OK:
Once it reboots, go under Menu > Settings > Maintenance again. Go down to the Firmware server field, and delete it by hitting the F1 button for backspace:
Go down to the next field and clear it out as well:
Once it's empty, replace the fields with following: Firmware Server: firmware.grandstream.com
You can use the 1 button to type in periods and slashes:
Once the addresses are inputted, click button F3 to save:
It will take you back to previous screen. Click on Maintenance again:
Go down to the Reboot option and select it. It will reboot again and it should auto-provision once it hits our server.
| |
 (2 votes) This article was helpful This article was not helpful |
